Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).     

阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。     

可见/红外宽光谱分色片偏振调控的设计

针对光学系统中可见/红外宽光谱分色片的偏振特性,采用诱导透射法设计了满足偏振遥感光学系统能量要求的可见/红外宽光谱分色片,并对其偏振特性进行了分析.通过计算获得了透射带400～900 nm可见/红外宽光谱分色片的偏振情况,采用等效层理论在其基底背面设计了偏振调控膜系,对分色片透射带的偏振度加以调控.使用needle优化...     

一阶速度-应力Biot双相各向同性介质弹性波

提出一种等价的一阶双曲型速度一应力Biot双相各向同性介质弹性波波动方程,以实现双相介质混合波场中纯快慢纵波和纯横波波场分离的问题.应用散度和旋度理论证明双相介质等价方程波场分离的可行性,采用高阶交错网格有限差分法构建高精度正演算子,推导其PML吸收边界条件和稳定性条件,并对均匀双相介质和层状非均匀双相介质模型进行数值...     

基于压电探测判定激光支持燃烧波和爆轰波的点燃阈值

为了获得激光支持燃烧波和爆轰波的点燃阈值,采用压电探测器检测波长为1 064 nm的Nd:YAG激光作用在铝靶表面所产生的应变和冲压。从实验结果观察到压电信号的变化分为3个阶段,分别为光热弹性应变阶段、等离子体增强耦合阶段和激光支持爆轰波对靶表面的压力阶段,并从理论上研究了这3个阶段的激光与靶材料相互作用的机理,从而可以从压电信号是否发生跃变判断出激光支持燃烧波和激光支持爆轰波的点燃阈值,与其它方法所得到结果基本吻合。     

近红外消偏振分光膜设计近红外消偏振分光膜设计

大角度倾斜入射时,光学薄膜表现出强烈的偏振效应。入射光S分量和P分量的反射率和透射率曲线,以及反射或透射引起的两个分量的相位变化都不再相同,彼此有一定的偏振分离。通过对产生偏振效应内在原因的分析,采用一个在近红外波段对于45倾斜入射光的S分量和P分量等效导纳非常接近的膜系结构,结合单纯形法优化算法,设计得到一个1 500～1 600 nm范围内反射率都是50％的近红外消偏振分光膜。结果显示,在45入射时,S分量和P分量的反射率曲线偏振分离小,反射和透射引起的相位变化也控制在很小范围。     

固定接触界面切向静弹性刚度问题研究

根据两球体单峰同时受法向、切向载荷时微滑切向应力的分布以及MB模型,给出了界面的总切向接触静弹性条件刚度、总条件法向载荷的解析解。将切向接触静弹性条件刚度的解析解嵌入到有限元软件中,获得了整机的理论模态。以一款八四七厂华中工学院XHK5140型自动换刀计算机数控立式镗铣床上的结合部为研究对象,通过实验对解析解进行了定量验证。研究结果表明：在理论振型与实验振型一致的条件下,界面模型的相对误差在-19．2％～16．8％之间。     

Three‐point bending tests—Part I: Mathematical study and asymptotic analysis

The goal of this work is to study the static behaviour of a three‐dimensional elastic beam when is subjected to a three‐point bending test. In the first part, under suitable compatibility conditions on the applied forces and on the geometry of the beam, we will prove the existence of a unique solution for the associated contact elastic problem; these conditions of compatibility on the data come from the absence of a Dirichlet condition on the beam boundary. In the second part, we will study the asymptotic behaviour of this problem; in particular, we will deduce the one‐dimensional models associated with the displacement components, and we will give the existence and uniqueness of solution for them. Moreover, we will give an expression for the normal axial stress in the beam which is related to the modulus of rupture of brittle materials. In the final part of the work, we will deal with the regularity of the solution for the bending problem and we will prove some properties of the coincidence set. Copyright © 2011 John Wiley & Sons, Ltd.     

投影的约化极小模和空间的夹角

Let M and N be nonzero subspaces of a Hilbert space H, and PM and PN denote the orthogonal projections on M and N, respectively. In this note, an exact representation of the angle and the minimum gap of M and N is obtained. In addition, we study relations between the angle, the minimum gap of two subspaces M and N, and the reduced minimum modulus of （I - PN）PM,     

周期性多孔材料等效剪切模量与尺寸效应研究

提出了以圆筒扭转力学模型为基础, 预测周期性多孔材料等效剪切模量及其研究尺寸效 应的一种简单有效计算方法. 以方形孔和圆形孔两种典型多孔材料为例进行了数值计算求解; 同时, 建立了几何参数随体胞尺寸缩放因子$n$的解析关系, 证明了两种构型的周期性多孔材 料的等效剪切模量均随尺寸缩放因子$n$的增大而减小. 当$n \to \infty $时, 即体胞尺寸相对整体结构无限小时, 多孔材料的等效剪切模量趋近收敛于一个恒定值; 当体胞的材料体分比增大时, 多孔材料等效剪切模量也随之增大. 此外, 依据周 期性多孔材料的结构对称特性, 使用体胞子结构有限元计算模型进行等效剪切模量及其尺寸 效应的预测, 极大地提高了计算效率.